852-1328
Configuration in the WBM
52
Product manual | Version: 1.2.0
Industrial Managed Switch
Figure 37: SNMP V1/V2c Community Setting
Table “WBM “Diagnostics” Page – “SNMP” Tab, SNMP V1/V2c Community Setting
“briefly provides descriptions of SNMP V1/V2c community string setting.
Table 25: WBM “Diagnostics” Page – “SNMP” Tab, SNMP V1/V2c Community Setting
Parameters
Factory Default
Description
(Community) String
Public (read-all-only) Define name of strings for authentication. The maximum length of
the string is 15 characters.
Private (read-write-
all)
Permission Type
-
Choose a type from the dropdown list: read-all-only and read-
write-all. See notes below for a briefed explanation.
•
Choose a type from the dropdown list: read-all-only and read-
write-all. See notes below for a briefed explanation
•
Read write-all: permission to read/write OID 1 Sub Tree.
10.5.1.3 SNMP Trap
The industrial managed switch provides a trap function that allows the switch to send no-
tification to agents with SNMP traps or inform. The notifications are based on the status
changes of the switch such as link up, link down, warm start, and cold start. For inform
mode, after sending SNMP inform requests, the switch will resends inform request if it
does not receive response within 10 seconds. The switch will try re-send three times. Fig-
ure “WBM “Diagnostics” Page – “SNMP” Tab, SNMP Trap” shows the SNMP Trap sec-
tion.
