Configuration in the WBM 71
852-1322/852-1328 Industrial Managed Switch
Manual
1.0.01
Table 34: WBM “Security” Page – “802.1X” – “Setting” Tab
Parameters
Factory Default Description
802.1x
Disabled
Choose to Enable/Disable 802.1X for all ports
Radius Server IP 0.0.0.0
Set an IP address of the RADIUS server
Server Port
1812
Set the port number of the RADIUS server. The range is
from 0 to 65535.
Accounting Port 1813
Set the accounting port number of the RADIUS server. The
range is from 0 to 65535.
NAS Identifier
Managed Switch Specify the identifier string for the 802.1X Network Access
Server (NAS). The maximum length is 30 characters.
Shared Key
NULL
A shared key between the managed switch and the RADIUS
Server. Both devices must be configured to use the same
key where the maximum length is 30 characters.
Confirmed
Shared Key
Dependent
Re-type the shared key string.
7.6.3.2 IEEE 802
.
1X Parameters Settings
A setting tab page of the 802
.
1X parameters is shown in Figure “WBM “Security”
Page – “802.1X” – “802.1X Parameter Setting” Tab”. These parameters are
related to the authentication periods, the timeout durations, and the maximum
number of authentication requests. Table “WBM “Security” Page – “802.1X” –
“802.1X Parameter Setting” Tab” summarizes the descriptions of these
parameters and their default settings
.
To keep the change of any input
parameters, a user should click on the
[Update]
button afterwards
.
Figure 45: WBM “Security” Page – “802.1X” – “802.1X Parameter Setting” Tab
