66 Configuration in the WBM
852-1322/852-1328 Industrial Managed Switch
Manual
1.0.01
7.6
Security
7.6.1
Static SAK Setting
Static secure association key (SAK) setting web page is shown in Figure “WBM
Page, “Security” – “Static SAK” Tab”. Note that WAGO 852-1322 and 852-1328
support MACSec protocol on port number 7 and 8. To enable secure association
mode on industrial managed switch’s port(s), first select one of the two ports from
the dropdown list under the Ports. Then, check the Enabled box. Then, enter the
Secure Channel Identifier (SCI) with a 16-digit hexadecimal number (i.e.,
0,1,2,…,a,b,c,d,e,f) and enter the Secure Association Key (SAK) with a 32-digit
hexadecimal number. Finally, click on the
[Submit]
button to update the setting
to one of the ports in the Static SAK Status table in the lower part.
Figure 40: WBM Page, “Security” – “Static SAK” Tab
