Configuration in the WBM 61
852-1322/852-1328 Industrial Managed Switch
Manual
1.0.01
7.5.3
System Log
7.5.3.1 Setting
The user can enable how the system log (syslog) will be saved and
/
or delivered
to other system in the System Log Setting tab page as show in Figure”
WBM
“Diagnostics” Page – “System Log” – “Setting” Tab”. The syslog can be saved to
flash memory inside the industrial managed switch and
/
or it can be sent to a
remote log server.
The user needs to select the log level and provides the IP
address of a remote log server and the service port of the log server.
Please click
on the
[Submit]
button after finishing the setup
.
Table “WBM “Diagnostics” Page
– “System Log” – “Setting” Tab” summarizes the descriptions of the Syslog
Settings‘ parameters.
Figure 36: WBM “Diagnostics” Page – “System Log” – “Setting” Tab
