Configuration in the WBM 55
852-1322/852-1328 Industrial Managed Switch
Manual
1.0.01
The SNMP V1/V2c Community Setting as shown in Figure “SNMP V1/V2c
Community Setting” allows the user to set a community string with a type of
permission for authentication or remove existing community string from the list by
clicking on the [Remove] button at the end of each community string item. The
users can specify a new string names by entering a text in the String field and
choose a type of permissions from the dropdown list of Permission Type. Then,
click on the
[Add]
button.
Figure 32: SNMP V1/V2c Community Setting
Table “WBM “Diagnostics” Page – “SNMP” Tab, SNMP V1/V2c Community
Setting “briefly provides descriptions of SNMP V1/V2c community string setting.
Table 25: WBM “Diagnostics” Page – “SNMP” Tab, SNMP V1/V2c Community Setting
Parameters
Factory Default Description
(Community)
String
Public (read-all-
only)
Define name of strings for authentication. The maximum length
of the string is 15 characters.
Private (read-
write-all)
Permission
Type
-
Choose a type from the dropdown list: read-all-only and read-
write-all. See notes below for a briefed explanation.
•
Choose a type from the dropdown list: read-all-only and
read-write-all. See notes below for a briefed explanation.
•
Read write-all: permission to read/write OID 1 Sub Tree.
