18 Assembly
WAGO-ETHERNET-Accessories
852
852-111 5 Port 100BASE-TX Industrial Eco Switch
Manual
Version 1.0.0
Pos: 8.1 /Alle Serien (Allgemeine Module)/Überschriften für alle Serien/Montieren - Überschrift 1 @ 3\mod_1225446744750_21.doc @ 24900
4 Assembly
Pos: 8.2 /Serie 852 (Ethernet-Zubehör)/Montieren/Montageort 852-111, 112 @ 3\mod_1221812987484_21.doc @ 21968
4.1 Installation
site
The location selected to install the Industrial Switch may greatly affect its
performance. When selecting a site, we recommend considering the following
rules:
•
Install the Industrial Switch at an appropriate place. See chapter “Technical
Data“ for the acceptable temperature and humidity operating ranges.
•
Fix the provided brackets at the back of the Industrial Switch to a DIN rail
to protect the switch from falling.
Pos: 8.3 /Serie 852 (Ethernet-Zubehör)/Montieren/Montieren 852-111 @ 4\mod_1236860862296_21.doc @ 28296
4.2
Carrier rail mounting
1
Remove the screws on the back of the Industrial Eco Switch.
2
Screw the carrier rail mounting to the back of the Eco Switch.
Figure 7: Mounting the carrier rail mounting
3
Rest the Industrial Eco Switch on the carrier rail.
Parallel and perpendicular mounting is possible.
