WAGOframe 31
WAGO-SPEEDWAY 767
Fieldbus Coupler for CANopen
6.3 Operation
Start the WAGOframe program using the icon on the desktop, or via
Start >
Programs > WAGO Software > WAGOframe > WAGOframe
.
After starting you can select either the "Point to point mode" or the "Expert
mode". The "Point to point mode" was developed specially for the configuration
of simple devices (such as WAGO Jumpflex). Use the "Expert mode" to set
parameters for the 767 components.
1.
Switch to the "Expert mode" and click
[Next >]
.
No device catalog will have been created on the initial call-up.
2. Click
[Yes]
in the dialog window that then appears to configure a device
catalog on your PC.
