765-1505/100-000
Commissioning
66
Product manual | Version: 2.0.0
8DIO FLD EI DC 24V 2.0A
Table 40:
Configuration Control
Drop-Down Menu
#
Option
Description
0
STATIC
The module’s IP address is configured statically. This is done using the module IP ad-
dress, the subnet mask and the gateway IP address entered on the “Device configura-
tion” tab.
1
BOOTP
The module gets its IP address with the BOOTP protocol.
2
DHCP
The module gets its IP address with the DHCP protocol. This is the standard setting.
• If static configuration is used, specify the IP address and subnet mask manually (the
gateway IP address is optional).
Table 41:
Device Configuration
Tab – Parameter Overview
Parameter
Settings/Action
Device IP address
IP address for the ETHERNET configuration with static IP address configuration
Subnet mask
Subnet mask for the ETHERNET configuration with static IP address configuration
Gateway IP address Gateway IP address for the ETHERNET configuration with static IP address configura-
tion
Other tabs under the menu item
Settings
are described below.
10.3.1.4.3 Storing Maintenance Information
On the
Maintenance Information
tab, you can store maintenance information, such as
the device name, the installation location and date, contact information, a description text
or the date of the last and next product service.
Figure 17:
Settings
Menu Item,
Maintenance Information
Tab (Example View)
Changes to settings require operator or admin rights. If you do not have these, the
Main-
tenance Information
tab is grayed out and cannot be edited.
The maintenance information includes:
