WAGO 765-1205/0100-0000, Manual, Page: 29 / 102

765-1205/0100-0000 Functions
Product manual | Version: 1.0.0 29
8DIO FLD EC DC 24V 2.0A
Function overview
The following overview shows the functions offered by WAGO Webserver I/O Field that is
integrated into the product and the menu items/tabs in the user interface that can be used
to address these functions:
Table 29: Function Overview for WAGO I/O Field Webserver for Digital Input/Output Modules
Menu Tab Description Section
Dashboard - Displaying product infor-
mation
Ports X01, X02 etc. (All) Port information and set-
tings for ports X01, X02, ...
8
Configure Ports
[ } 61]
Information Display current measured
values for port (tempera-
ture, voltage, current and
state on pins 1, 2 and 4)
Status Displays status information
for the entire port
Configuration Make port settings (such
as operating mode or
product check for valida-
tion and backup)
Process data Displays the process data
(input/output)
Settings (All) Product settings
Device configuration Configure parameters for
IP connection 8 Configuring IP Param-
eters [
}
62]
Maintenance information Save maintenance infor-
mation 8 Storing Maintenance
Information [
}
63]
Factory reset Resetting the product to
factory settings 8 Resetsetting the Mod-
ule to the Factory Set-
tings [
}
66]
Firmware upgrade Update firmware 8 Updating Firmware
[
}
91]
Bluetooth Access via Bluetooth
®
8 Configure Bluetooth
[ } 66]
DIOForcing - Forcing for digital inputs
and outputs
8
Forcing Digital Inputs
and Outputs [ } 72]
User administration - Set up and manage users
8
Logging Users on and
off and Managing Them
[
}
69]
Sign-in,
Sign-out - Log users on and off
The functional scope described can vary depending on the module type.
5.5.3 WAGO I/O Field app
The WAGO I/O Field app is an app for maintenance, diagnostics, operation and monitor-
ing of installed WAGO I/O System Field modules and IO-Link devices.
This app allows you to display product information, read and write process data and ad-
just settings and parameters for both fieldbus modules and IO-Link devices. The commu-
nication this requires takes place through the Bluetooth
®
interface of the mobile device
once a Data Matrix code has been scanned to select the product.