WAGO 762-5/8000-000 Series, Manual

Page: 115 / 202

Touch Panel Advanced Line Commissioning 115
762-5xxx/8000-000x TP 600
Manual
Version 1.3.0
</dg_
8.5.3.22 “Mass Storage” Page
A group containing information about the storage volume is displayed for each
storage volume that is found, along with an additional group for formatting (when
this is possible).
The group title contains the designation for the storage volume (“SD card” or
“Internal Flash”) and, if this storage volume is also the active partition, the text
“Active Partition”.
8.5.3.22.1 “<Device Name>” Group(s)
Table 74: WBM “Mass Storage” Page – “<Device Name>” Group
Parameters Explanation
Device
The name of the storage volume in the operating
system file system is displayed here.
Volume name The name of the storage volume is displayed here.
8.5.3.22.2 “<Device Name> - create new filesystem” Group(s)
Table 75: WBM “Mass Storage” Page – “<Device Name> - create new filesystem” Group
Parameters Explanation
Filesystem type
Here you can select the format in which the file
system should be created on the memory card.
Ext4
The file system is created in Ext4 format.
The files are not readable under Windows!
FAT The file system is created in FAT format.
Volume Name
Specify the name for the storage volume when
formatted.
Data are deleted!
Any data stored in the storage volume is deleted during formatting!
To format the specified storage volume, click [Start Formatting] .