92
Operation
WAGO-TO-PASS® 761
761-214 Telecontrol Module Compact, 8 AI, ESP, DSP
Manual
Version 2.0.0
8.5
Displaying the Data Logger (DSP)
The
TO-PASS
®
telecontrol module is equipped with a data logger. The size of the
data logger depends on the device used and is specified in the technical data.
A process image contains all of the digital and analog inputs available at the
TO-
PASS
®
telecontrol module. Starting with Firmware Version 2.31, the process
image will also contain all analog and digital outputs and, starting from Firmware
Version 2.33 all of the counter statuses and counter values.
The cycle time with which the process image is to be saved can be configured.
The average value can also be provided for the analog input values for cyclical
storage.
To read the contents of the data logger, select the menu item
Edit > Read all data
records
. Then display all values of the data logger using the menu item
Visualization > Data logger
.
Either select all inputs or only specific inputs with the help of the selection field in
the upper portion of the window.
All entries are displayed as a table with the complete process image. Digital inputs
and outputs are displayed as bar charts; analog inputs and outputs as a curve
diagram.
Above the table or the diagram, the date and time of the first value displayed is
shown on the left side, and, on the right side, the date and time of the last value
displayed.
The navigation buttons on the right side of the window have the following
meaning:
Table 43: Navigation DSP
Button
Function
Jumps to the first data record of the table or the diagram
Jumps to the previous data record
Goes back by 20 data records
Goes forward by 20 data records
Jumps to the next data record
Jumps to the last data record of the table or the diagram
Pages the table or the diagram back to the first data record
Stops paging in the table or the diagram
Pages the table or the diagram forward to the last data record
