8
List of Figures
WAGO I/O System 750
750-940 EnOcean RS-485 Gateway; 868 MHz
Manual
Version 1.3.0, valid from FW/HW Version 01/01
Pos: 15 /Alle Serien (Allgemeine Module)/Überschriften/Ebene 1/Wichtige Erläuterungen - Überschrift 1 @ 4\mod_1241428899156_21.docx @ 32170 @ 1 @ 1
2
Important Notes
Pos: 16.1 /Alle Serien (Allgemeine Module)/Rechtliches, Allgemeines/Wichtige Erläuterungen - Einleitung @ 3\mod_1221059818031_21.docx @ 21717 @ @ 1
This section includes an overall summary of the most important safety
requirements and notes that are mentioned in each individual section. To protect
your health and prevent damage to devices as well, it is imperative to read and
carefully follow the safety guidelines.
Pos: 16.2 /Alle Serien (Allgemeine Module)/Überschriften/Ebene 2/Rechtliche Grundlagen - Überschrift 2 @ 3\mod_1221060626343_21.docx @ 21726 @ 2 @ 1
2.1
Legal Bases
Pos: 16.3 /Alle Serien (Allgemeine Module)/Rechtliches, Allgemeines/Änderungsvorbehalt - Überschrift 3 und Inhalt @ 3\mod_1221060036484_21.docx @ 21720 @ 3 @ 1
2.1.1
Subject to Changes
WAGO Kontakttechnik GmbH & Co. KG reserves the right to provide for any
alterations or modifications. WAGO Kontakttechnik GmbH & Co. KG owns all
rights arising from the granting of patents or from the legal protection of utility
patents. Third-party products are always mentioned without any reference to
patent rights. Thus, the existence of such rights cannot be excluded.
Pos: 16.4 /Serie 750 (WAGO I/O SYSTEM)/Wichtige Erläuterungen (alte Struktur)/Personalqualifikation/Personalqualifikation 750-xxxx - Überschrift 3 und Inhalt @ 3\mod_1224061208046_21.docx @ 24063 @ 3 @ 1
2.1.2
Personnel Qualifications
All sequences implemented on WAGO I/O System 750 devices may only be
carried out by electrical specialists with sufficient knowledge in automation. The
specialists must be familiar with the current norms and guidelines for the devices
and automated environments.
All changes to the coupler or controller should always be carried out by qualified
personnel with sufficient skills in PLC programming.
Pos: 16.5 /Serie 750 (WAGO I/O SYSTEM)/Wichtige Erläuterungen (alte Struktur)/Bestimmungsgemäße Verwendung/Bestimmungsgemäße Verwendung 750-940 EnOcean-Gateway @ 36\mod_1589994864023_21.docx @ 582219 @ 3 @ 1
2.1.3
Intended Use
The EnOcean RS-485 Gateway 750-940 is used as a gateway for digital and
analog signals from EnOcean actuators and sensors.
The product is designed for a work setting that meets the criterion of protection
type IP 30 (only front side). Protection against finger injury and solid impurities
≥
2.5 mm diameter is ensured; protection against water damage is not ensured.
Unless otherwise specified, operation of the components in wet and dusty
environments is prohibited.
Use without additional protective measures in environments within which dust,
corrosive fumes, gases or ionized radiation can occur is considered improper
use.
The EnOcean Gateway must not be used in any relation with equipment that
supports, directly or indirectly, human health or life or with applications that can
result in danger for people, animals or real value.
Emergency stop functions and equipment must not be made ineffective. Please
note the relevant standards; e.g., DIN EN 418.
