30
System Description
WAGO-I/O-SYSTEM 750
750-880, 750-880/025-000 ETHERNET Programmable Fieldbus Controller
Manual
Version 1.0.1
Figure 7: Supply module with fuse carrier (Example 750-610)
NOTICE
Observe the maximum power dissipation and, if required, UL requirements!
In the case of power supply modules with fuse holders, you must only use fuses
with a maximum dissipation of 1.6 W (IEC 127).
For UL approved systems only use UL approved fuses.
In order to insert or change a fuse, or to switch off the voltage in succeeding bus
modules, the fuse holder may be pulled out. In order to do this, use a screwdriver
for example, to reach into one of the slits (one on both sides) and pull out the
holder.
Figure 8: Removing the fuse carrier
Lifting the cover to the side opens the fuse carrier.
