WAGO-I/O-SYSTEM 750
Function Description 103
750-880, 750-880/025-000 ETHERNET Programmable Fieldbus Controller
Manual
Version 1.0.1
7.4.2
Back-up Function (Saving Device Settings on the Memory
Card)
The fieldbus nodes and the SPS program are in operation and the memory card is
plugged in.
On the "Features" Web page, start the "Backup device settings to removable disk"
function in order to save the internal drive and device settings on the memory card
during normal operation.
Figure 46: WBM page „Features“
The backup is triggered in the Web-based management and the files on the
internal drive in the /copy/ directory and the corresponding subdirectories are
stored.
The information that is not present as files on the fieldbus controller is stored in
XML format in the /settings/ directory.
Meanwhile, the SD-LED blinks yellow/orange.
The device settings and files of the internal drive are then saved on the memory
card.
