WAGO-I/O-SYSTEM 750 XTR
Device Description 45
750-8212/040-010 PFC200 G2 2ETH M12 RS XTR
Manual
Version 1.0.0, valid from FW version 03.01.07(13)
3.5
Operating Elements
3.5.1
Operating Mode Switch
Figure 16: Mode Selector Switch
The function of the mode selector switch depends on the activated runtime
system (CODESYS 2 or
e!
RUNTIME
).
3.5.1.1 CODESYS 2 Runtime System
</dg_
Table 14: Mode Selector Switch
Item
Activation Function
RUN
Latching
Normal mode
CODESYS 2 application runs.
STOP
Latching
Stop
CODESYS 2 application stopped.
RESET Spring-return
Reset warm start
or
Reset cold start
(based on the duration of activation, see Section
“Starting” > “Initiating Reset Functions”)
</dg_
Other functions can also be initiated using the reset button.
3.5.1.2
e!RUNTIME
Runtime System
</dg_
Table 15: Mode Selector Switch
Position
Actuation Function
RUN
Latching
Normal operation
e!
RUNTIME
applications running.
STOP
Latching
Stop
All
e!
RUNTIME
applications have stopped.
RESET Spring-return
Reset warm start
or
Reset cold start
(depending on length of actuation, see Section
“Starting” > “Initiating Reset Functions”)
</dg_
Other functions can also be initiated using the reset button.
