WAGO 750-8212/040-010 Manual Download Page 133

Page: 133 / 434

WAGO-I/O-SYSTEM 750 XTR

Commissioning 133

750-8212/040-010 PFC200 G2 2ETH M12 RS XTR

Manual

Version 1.0.0, valid from FW version 03.01.07(13)

7.8.1.5 “General PLC Runtime Configuration” Page

The settings for the boot project created with the programming software are given

on the “General PLC Runtime Configuration” page.

7.8.1.5.1 “General PLC Runtime Configuration” Group

Table 54: WBM “General PLC Runtime Configuration” Page – “General PLC Runtime Configuration”

Group

Parameters

Explanation

PLC runtime version

Select here the PLC runtime system to be enabled.

None

No runtime system is enabled.

CODESYS 2

CODESYS 2 runtime system is

enabled.

RUNTIME

runtime system is

enabled.

Home directory on memory

card enabled

Define if the home directory for the runtime system

should be moved to the memory card.

Disabled

The home directory is stored in

the internal memory.

Enabled

The home directory is moved to

the memory card.

All data is deleted when switching the runtime system!

The runtime system’s home directory is completely deleted when switching the

runtime system!

Insert a memory card before switching the home directory!

When moving the home directory to the memory card, insert a memory card

formatted to support file system. Only the first partition of a memory card can be

accessed at /media/sd and can be used as the home directory.

Perform a reset before switching the home directory!

Stop IEC-61131 applications in use before switching the home directory of the

runtime system.

Restore the device to its initial state using the “Reset” function. Any boot project

is deleted.

Summary of Contents for 750-8212/040-010



















































































































































































































































































































































































































































Search results

Summary of Contents for 750-8212/040-010

Reviews:

Related manuals for 750-8212/040-010

Brands by name

Popular brands

WAGO 750-8212/040-010, Manual

Search results

Summary of Contents for 750-8212/040-010

Reviews:

Related manuals for 750-8212/040-010

Brands by name

Popular brands