10
•
750-634 [Incremental Encoder Interface]
Technical
Data
WAGO-I/O-SYSTEM
750
I/O
Modules
2.1.1.5 Technical
Data
Module Specific Data
Sensor connection
A, B, C
Sensor operation voltage
DC 24 V
Signal voltage A, B, C
(1) U > 15 V
(0) U < 5V
Counter
16 Bit binary
Cut off frequency
1 MHz
Quadrature decoder
4- fold report
Zero impulse latch
16 bits
Commands
read, set, enable
Voltage supply
DC 24 V (- 15 % ... + 20 %)
Current consumption
max
(internal)
50 mA
Current consumption
max
(field side) 0 mA (without sensor load)
Isolation
500 V (system/supply)
Bit width
2 x 16 bits data
1 x 8 bits Control/Status
1 x 8 bits reserved
Dimensions (mm) W x H x L
12 x 64* x 100
*from upper edge of DIN 35 rail
Weight
ca. 60 g
Standards and Regulations (cf Chapter 2.2 of the Coupler/Controller Manual)
EMC-Immunity of interference
acc. to EN 50082-2 (95)
EMV-Emission of interference
acc. to EN 50081-2 (94)
Approvals (cf Chapter 2.2 of the Coupler/Controller Manual)
Conformity Marking
More Information
Detailed references to the approvals are listed in the document "Overview
Approvals WAGO-I/O-SYSTEM 750", which you can find on the CD ROM
ELECTRONICC Tools and Docs (Item-No.: 0888-0412)
or in the internet under:
!
Documentation
!
WAGO-I/O-SYSTEM 750
!
System Description