background image

10  Important Notes 

WAGO I/O System 750 XTR 

 

 

750-600/040-001 End Module with Potential Group XTR 

Manual 

 

Version 1.0.1  

 

the section “Device Description” > “Standards and Guidelines” in the manual for 

the used device. 

Appropriate housing (per 2014/34/EU) is required when operating the WAGO I/O 

System 750 in hazardous environments. Please observe the installation 

regulations! Please note that a prototype test certificate must be obtained that 

confirms the correct installation of the system in a housing or switch cabinet. 

The implementation of safety functions such as EMERGENCY STOP or safety 

door monitoring must only be performed by the F I/O modules within the modular 

WAGO I/O System 750. Only these safe F I/O modules ensure functional safety 

in accordance with the latest international standards. WAGO's interference-free 

output modules can be controlled by the safety function. 

 

2.1.4 

Technical Condition of Specified Devices 

The devices to be supplied ex works are equipped with hardware and software 

configurations, which meet the individual application requirements. These 

modules contain no parts that can be serviced or repaired by the user. The 

following actions will result in the exclusion of liability on the part of WAGO GmbH 

& Co. KG: 

• 

Repairs, 

• 

Changes to the hardware or software that are not described in the 

operating instructions, 

• 

Improper use of the components. 

 

Further details are given in the contractual agreements. Please send your 

request for modified and new hardware or software configurations directly to 

WAGO GmbH & Co. KG. 

 

2.1.4.1  Disposal 

 

2.1.4.1.1  Electrical and Electronic Equipment 

 

 

Electrical and electronic equipment may not be disposed of 

with household waste. This also applies to products without 

this symbol. 

 

Electrical and electronic equipment contain materials and substances that can be 

harmful to the environment and health. Electrical and electronic equipment must 

be disposed of properly after use. 

WEEE 2012/19/EU applies throughout Europe. Directives and laws may vary 

nationally. 

 

Summary of Contents for 750-600/040-001

















































Reviews: