WAGO-I/O-SYSTEM 750
Commissioning 63
750-564 4AO U/I
Manual
Version 1.0.0
7.1.2.1 Title Bar
The title bar in the parameterization dialog contains the program icon, the window
title and the button for closing the application window.
The window title provides information about the position of the selected I/O
module within the fieldbus node used and the item number of the selected
I/O module.
7.1.2.2 Information Bar
• Item number: 750-564
• Item description: 4AO U/I
• Version: 01.01.xx (xx)
7.1.2.3 Buttons
Table 50: Buttons
Button
Function
Explanation
[Exit]
Closes the parameterization dialog.
The connection to the I/O module is interrupted.
[Open]
Opens the dialog for loading a saved parameter
file.
[Save]
Opens the dialog for saving parameterization
information in a parameter file.
[Read]
Reads the current parameterization from the I/O
module.
[Write]
Writes the modified parameters to the I/O
module.
[Factory
Settings]
Resets all I/O module settings to factory settings
Note
: The values for the user calibration are also
reset to their default values. Therefore, after the
factory settings are restored, modified values
must be modified again and written to the I/O
module.
Tip:
Make a note of any value settings before
resetting the I/O module.
[Help]
Opens an I/O module help dialog.
