46 Process Image
WAGO-I/O-SYSTEM 750 XTR
750-563/040-000 2AO 0/4-20mA/ 6-18V DC/ 16Bit /XTR
Manual
Version 1.3.0
Values must be input in raw data format!
The values for the lower and upper limiting value must be entered in raw data
format, i.e., if a user scaling is set, it must be taken into account for the entry of
the limiting values. If in addition a number notation in the (+/
−
) range is selected,
the limiting values must be converted into equivalent values for a positive number
range.
4.5.2.2 “Offset/Gain” Page
Figure 12: “Offset/Gain” Page
The
Offset/Gain
page enables the setting of the offset and amplification values
of the user and manufacturer scalings. The
[Write]
button is used to change and
transfer the following parameters to the I/O module:
