WAGO-I/O-SYSTEM 750 XTR
Commissioning
63
750-486/040-000 4AI 0/4-20mA NE43 Ex i XTR
Manual
Version 1.0.0
7.1.1.3.1.2 “Save” Menu Item
Calibration settings are not saved!
Please note that the calibration settings cannot be saved in the parameter file.
Note the memory range!
Please note that only the settings are saved in the parameter file that you have
already transferred to the I/O module by clicking the
[Write
]
or
[Write all]
buttons
in the main menu.
In this menu item you can save the changes you have made in a parameter file.
Proceed as follows:
1.
Click the
[File]
button in the horizontal tab menu.
The application menu opens.
2.
Click the
[Save]
button in the application menu.
A standard Windows dialog window for selecting the target directory then
opens.
3.
Select the target directory in which you want to save the new parameter
file.
4.
Click
[Save]
in the standard Windows dialog.
The parameter file is then saved to the target directory that you have
selected.
7.1.1.3.2 “Start” Tab
1.
Click the
Start
tab in the horizontal tab menu to display the following
selection options in the main menu.
Figure 24: Contents of the Horizontal Tab
Start
2.
If you select the
Channel settings
menu item in the vertical tab menu, you
can also choose the required I/O module channel in the main menu.
Figure 25: Start > Main Menu > Channel Selection List
