WAGO I/O SYSTEM 750 XTR
Appendix 205
750-333/040-000 FC PROFIBUS G2 12MBd XTR
Manual
Version 1.4.0
12.3.2.4 Parameters of the Analog Input Modules
The table shows the parameterization properties of the 1, 2, 3 and 4-channel
analog input modules with asynchronous diagnostic properties, but without
individual parameters.
Table 158: Parameters of the 1, 2, 3 and 4-channel analog input modules (AI)
1AI, 2AI, 3AI, 4AI
Representatives of the 1AI:
75x-491
Representatives of the 2AI:
75x-452, 75x-454, 75x-456, 75x-461, 75x-462,
75x-465, 75x-466, 75x-467, 75x-469, 75x-470,
75x-472, 75x-473, 75x-474, 75x-475, 75x-476,
75x-477, 75x-478, 75x-479, 75x-480, 75x-481,
75x-483, 75x-485, 75x-487, 75x-492,
Representatives of the 3AI:
75x-493,
Representatives of the 4AI:
75x-453, 75x-455, 75x-457, 75x-459, 75x-460,
75x-463, 75x-464, 75x-468
Parameterization data length in bytes
Standard parameterization
Structured parameterization
4
8
Parameter
Settings
Description
Scope
Terminal is physically
The I/O module process data is
Module
(optionally) not plugged
•
(optionally) set to zero or filtered by the
fieldbus coupler.
plugged
*)
•
supplied by the I/O module.
Diagnosis
The diagnostic information of the corresponding
channel is
Channel
disabled
*)
•
not transmitted to the PROFIBUS DP
master.
enabled
•
transmitted to the PROFIBUS DP master.
*)
Default settings