WAGO I/O SYSTEM 750 XTR
Appendix 187
750-333/040-000 FC PROFIBUS G2 12MBd XTR
Manual
Version 1.4.0
12.2.15 2-Channel Vibration Velocity/Bearing Condition
Monitoring VIB I/O
For the PI configuration for the 2-Channel Vibration Velocity/Bearing Condition
Monitoring VIB I/O, there is one module type available:
Table 130: 2-Channel Vibration Velocity/Bearing Condition Monitoring VIB I/O
– Module Types
Configuration module
Description
Proxy I/O modules
VIB_IO
2-Channel Vibration Velocity/Bearing Condition Monitoring
VIB I/O
75x-645
The VIB I/O module is used in the online-monitoring of machine vibration. It
records the two most important parameters required for the condition analysis:
vibration severity and roller bearing condition.
The following table lists the number of bytes reserved for the module in the
respective process image (PI).
Table 131: Vibration Monitoring
– Number of Bytes
I/O Modules
PBDP module type
Proxy (PBDP module type)
Data length
[Byte]
Configuration identifier
Data type
Inst.
I
O
hex
dec
VIB_IO
12
12
0xF5
245
UINT8, UINT16
(UINT8, UINT8[2])
2(2)
The following table describes the process image information of the module type
for the vibration monitoring module.
