manualshive.com logo in svg

WAGO 750-1504, Manual

Share
Download
WAGO 750-1504 Manual Download Page 17

WAGO-I/O-SYSTEM 750 

Device Description 

17 

750-1504 16DO 24V DC 0.5A 

 

 

 

s: 26 /Serie 750 (WAGO-I/O-SYSTEM)/Gerätebeschreibung/Anschlüsse/Leistungskontakte/Feldversorgung - Überschrift 3 @ 6\mod_1256294692864_21.doc @ 43664 @ 3 @ 1 

Po

 

3.2.2 

Power Contacts/Field Supply 

Po

 

s: 27.1 /Serie 750 (WAGO-I/O-SYSTEM)/Wichtige Erläuterungen/Sicherheitshinweise/Vorsicht/Vorsicht: Verletzungsgefahr durch scharfkantige Messerkontakte! @ 6\mod_1256193279401_21.doc @ 43414 @  @ 1 

 

 

 

Risk of injury due to sharp-edged male contacts! 

The male contacts are sharp-edged. Handle the module carefully to prevent injury.

 

s: 27.2 /Serie 750 (WAGO-I/O-SYSTEM)/Gerätebeschreibung/Anschlüsse/Leistungskontakte 2 LK (Messer/Feder) @ 7\mod

Po

 

_1266317883167_21.doc @ 50688 @  @ 1 

The I/O module 750-1504 has 2 self-cleaning power jumper contacts that supply 
and transmit power for the field side. The contacts on the left side of the I/O 
module are designed as male contacts and the contacts on the right side as spring 
contacts. 

Table 4: Power jumper contacts 

Connection

Type 

Number 

Function 

1 Blade 

contact 

2 

Infeed of the field 

supply voltage 

(U

V

 and 0 V) 

1

2

1

2

 

Figure 3: Power 
jumper contacts 

2 Spring 

contact 

2 

Forwarding of the 

field supply voltage

(U

V

 and 0 V) 

 

Po

 

 

s: 27.3 /Serie 750 (WAGO-I/O-SYSTEM)/Wichtige Erläuterungen/Sicherheitshinweise/Achtung/Achtung: Maximaler Strom Leistungskontakte 10 A @ 3\mod_1226499143500_21.doc @ 25029 @  @ 1 

 

 

 

Do not exceed maximum current via power contacts! 

The maximum current to flow through the power contacts is 10 A.  
Greater currents can damage the power contacts.  
When configuring the system, ensure that this current is not exceeded. If 
exceeded, an additional potential feed module must be used. 

 

s: 27.4 /Serie 750 (WAGO-I/O-SYSTEM)/Wichtige Erläuterungen/Sicherheitshinweise/Hinweis/Hinweis: Potentialeinspeiseklemme für Erde einsetzen! @ 3\mod_1226499037468_21.doc @ 25023 @  @ 1 

Po

 

 

 

 

 

Use potential feed module for Ground (earth)! 

The I/O module has no power contacts for PE intake and transfer. Use a potential 
feed module when a PE feed is needed for the subsequent I/O modules. 

 

s: 28 /Dokumentation allgemein/Gliederungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.doc @ 21810 @  @ 1 

Po

 

Manual 

 

Version 1.0.1  

 

Summary of Contents for 750-1504





































Reviews:

No comments

Brands by name

Popular brands

Load more brands