16
Device Description
WAGO-I/O-SYSTEM 750
750-1418 8DI 24V DC 0.2ms, low-side switching, 2-conductor
Manual
Version 1.1.0
3.2.2
Power Jumper Contacts/Field Supply
Risk of injury due to sharp-edged male contacts!
The male contacts are sharp-edged. Handle the module carefully to prevent injury.
The I/O module 750-1418 has 2 self-cleaning power jumper contacts that supply
and transmit power for the field side. The contacts on the left side of the I/O
module are designed as male contacts and the contacts on the right side as spring
contacts.
Figure 3: Power jumper contacts
Table 4: Caption acc. to view “Power jumper contacts”
Connector
Type
Function
1
Spring contact
Forwarding of the
field supply voltage (U
v
)
2
Spring contact
Forwarding of the
field supply voltage (0 V)
3
Blade contact
Infeed of the
field supply voltage (0 V)
4
Blade contact
Infeed of the
field supply voltage (U
v
)
Do not exceed maximum current via power contacts!
The maximum current to flow through the power contacts is 10 A.
Greater currents can damage the power contacts.
When configuring the system, ensure that this current is not exceeded. If
exceeded, an additional potential feed module must be used.
