24
–
4PU & 4PS - Wago
Appendix 1
–
Multi tariff function
A1.1 How to switch between T1 und T2
The meter is equipped with a multi tariff functionality. T1 and T2 can be activated by an external voltage connected to the
terminals 10/11.
As soon as a voltage of 230V AC is applied to terminals 10 and 11, the meter switches to tariff 2 and writes the measured values
into the the measured values into the registers provided for T2.
4PU:
4PS:
A1.2 How to switch between T3 and T4
T3 and T4 can only be activated by Bluetooth, Modbus, M-bus or using the button function. After activating T3 and/or T4
once, the energy values per tariff (3 / 4) will be displayd in the MID relevant part of the display. This cannot be undone.
