WAGO 2789-9023, Manual

Page: 16 / 94

2789-9023 Properties
16 Product manual | Version: 1.0.0
EtherNet/IP Communication Module
3.6 Indicators
The product has a visual status indicator. This indicator consists of six LEDs.
LNK/ACT2
SPEED1
LNK/ACT1
COM OK
ERR
SPEED2
Figure 4: Visual Status Indicator
Table 2: Operating Status Indication
Indicator LED Description State Description
ERR Error Off Ready for operation; no error
On General error/system error
Flashing (8 Hz) EtherNet/IP connection error
Flashing (16 Hz) Communication module is resetting to factory
defaults
COM OK Device status Off No connection to lower-level device
On Initialization
Flashing (2 Hz) Communication active
Flashing (16 Hz) IP address is being assigned via DHCP
LNK/ACT1 Port 1: connection/activity Off No connection present
On Connection present, but no activity
Flashing Connection and activity present
SPEED1 Port 1: speed Off Connection rate: 10 Mbit/s
On Connection rate: 100 Mbit/s
LNK/ACT2 Port 2: connection/activity Off No connection present
On Connection present, but no activity
Flashing Connection and activity present
SPEED2 Port 2: speed Off Connection rate: 10 Mbit/s
On Connection rate: 100 Mbit/s
3.7 Control Elements
A reset button is located on the front of the product. This button can be used to reset the
product.
See 8 Operating via Reset Button [ } 51] for a detailed description of how you can use
the reset button to make settings.
3.8 Technical data
3.8.1 Product
Table 3: Technical Data – Product
Property Value
Width 35 mm
Height 80 mm