Operating manual Piston pump IceBreaker 40-200 ccm (Finishing)
5 Description
Order number 2333538 | Edition 03/2021
21
5.2.2 Fluid section
The fluid section (9) has been designed as a piston pump with exchangeable ball valves. The
hard chrome-plated pump piston runs in two fixed packings which are self-adjusting by
means of a pressure spring, thus resulting in a long service life.
Between the air motor (4) and the fluid section (9) there is a separating agent cup (7) for
holding the separating agent.
5.3 PROTECTIVE AND MONITORING EQUIPMENT
WARNING
Overpressure!
Danger to life from bursting device components.
4
Never change the safety valve setting.
The air motor is fitted with a safety valve. The safety valve has been set and sealed at the
factory. In case of pressures over and above the permissible operating pressure, the spring-
loaded valve, automatically opens and releases the excess pressure.
The control housing is equipped with noise insulation. Never operate the device without
noise insulation.
The connection set is equipped with a coupling cover. Never operate the device without a
coupling cover.
5.4 EXTENT OF DELIVERY
Piston pump consisting of:
-
Fluid section
-
Air motor
-
Connection set for air motor - fluid section
-
Air pressure regulator for air motor
The standard equipment includes:
Stk
Order no.
Designation
1
9992504
Separating agent 250 ml; 250 cc
1
2333537
Operating manual, in German
1
See Chapter EU Declaration of Con-
Declaration of Conformity
1
See chapter Languages [
Operating manual in the local lan-
guage
The delivery note shows the exact scope of delivery. Accessories: see Chapter Accessories
[
67].
5.5 DATA
5.5.1 Materials of the parts transporting paint
Paint-wetted part
Product
Housing
Stainless steel
Piston
Stainless steel and hard chrome
Valves balls
Stainless steel
