manualshive.com logo in svg

WAGNER TOPFINISH DD10, Operating Manual

Share
Download
WAGNER TOPFINISH DD10 Operating Manual Download Page 46

46

VERSION 12/2017

ORDER NUMBER DOC 2366672

TOPFINISCH DD10

15.3  EU DECLARATION OF CONFORMITY

We hereby declare that the supplied version of diaphragm pumps and spray packs:

TOPFINISH DD10

complies with the following guidelines:

2006/42/EC
2014/34/EU (ATEX Directive)

Applied standards, in particular:

EN ISO 12100:2010

EN 12621: 2006+A1: 2010

EN 809: 1998+A1:2009+AC:2010

EN 1127-1:2011

EN ISO 4413:2010

EN ISO 80079-36:2016

EN ISO 4414:2010

EN ISO 80079-37:2016

EN ISO 13732-1:2008

EN ISO/IEC 80079-34:2011

EN 14462:2015

Applied national technical standards and specifications, in particular:

 Chapter 2.29 and Chapter 2.36

Identification:

 

EU Declaration of Conformity

The EU Declaration of Conformity is enclosed with this product. If needed, further copies 

can be ordered through your WAGNER dealer by specifying the product name and serial 

number.

Order number:

2367686

Summary of Contents for TOPFINISH DD10

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands