WAGNER SprayPackE, Operating Manual

Page: 26 / 76

26
VERSION 01/2020 ORDER NUMBER DOC2397091
SprayPackE
5.6.1 TERMINAL ASSIGNMENT
Terminal block X40: Current supply 3P+N+PE 230/400 V 50/60 Hz
Address Terminal Signal Description
X40:1 up to 4 mm² L1 Current supply, 1rd phase
X40:2 up to 4 mm² L2 Current supply, 2rd phase
X40:3 up to 4 mm² L3 Current supply, 3rd phase
X40:4 up to 4 mm² N Current supply, neutral conductor
X40:5 N No connection
X40:6 up to 4 mm² PE Current supply, PE ground conductor
Terminal block X10: Interface for emergency stop output, two channels
Address Terminal Signal Description
X10:1 up to 2.5 mm² K1 EMERGENCY STOP circuit Channel 1
(open when triggered or device OFF)
X10:2 up to 2.5 mm² K1 EMERGENCY STOP circuit Channel 1
(open when triggered or device OFF)
X10:3 up to 2.5 mm² K2 EMERGENCY STOP circuit Channel 1
(open when triggered or device OFF)
X10:4 up to 2.5 mm² K2 EMERGENCY STOP circuit Channel 1
(open when triggered or device OFF)
Terminal block X20: Supply for EPG and movement
Address Terminal Signal Description
X20:1-9 up to 2.5 mm² L-N-PE 230 VAC supply - EPG
X20:10 up to 2.5 mm² 24 VDC DC operating voltage for frequency converter communication
X20:11 up to 2.5 mm² GND GND of DC operating voltage
X20:12 up to 2.5 mm² L 230 VAC supply for frequency converter
X20:13 up to 2.5 mm² N Neutral conductor
X20:14 up to 2.5 mm² PE Ground conductor
The entire circuit can be found in EPLAN 2373527 CPE or EPLAN 2374695 CPE-S.