WAGNER Prima Sprint 3L Page 94 Translation Of The Original Operating Manual Download

Page: 94 / 128

Prima Sprint

P_01185

OPERATING MANUAL

VERSION 07/2009

ORDER NUMBER DOC 2305835

9.4.2

SWITCHING THE GUN TYPES

Procedure:

(For example: switching from Corona to Tribo)

1.  Switch off control unit with switch 1 on rear.
2.  Change the coating powder from Corona to Tribo.
3.  Disconnect the hose 2 (black, atomizing air) from the Corona gun and connect it to the

Tribo gun (Tribo air).

4. Disconnect the powder feed hose of the Corona spray gun from the powder injector

and connect the Tribo gun hose on the powder injector.

5. Set the switch C on the switchbox to Tribo.

Hint:

Clean thoroughly the powder residues from all powder-conveying parts, before changing
to another gun type.

Summary of Contents for Prima Sprint 3L

































































































































Search results

Summary of Contents for Prima Sprint 3L

Reviews:

Related manuals for Prima Sprint 3L

Brands by name

Popular brands

WAGNER Prima Sprint 3L, Translation Of The Original Operating Manual

Search results

Summary of Contents for Prima Sprint 3L

Reviews:

Related manuals for Prima Sprint 3L

Brands by name

Popular brands