75
OPERATING MANUAL
VERSION 05/2017
ORDER NUMBER DOC 2357061
8
OPERATION
Below, operation with manual guns is described. For automatic guns the same workflow
applies correspondingly.
8.1
TRAINING THE OPERATING STAFF
The operating staff must be qualified to operate the entire system.
The operating staff must be familiar with the potential risks associated with improper
behavior as well as the necessary protective devices and measures.
Before work commences, the operating staff must receive appropriate system training.
8.2
SAFETY INSTRUCTIONS
Before carrying out any work, ensure that commissioning is carried out in accordance with
Chapter
.
8.2.1 EMERGENCY DEACTIVATION
In the case of unforeseen occurrences:
− Switch off main switch.
− Switch off air supply of system and pumps.
− Point the manual gun into a grounded metal bucket. Open the gun's trigger mechanism
step by step in order to relieve the pressure. Avoid splashback.
− Secure the gun.
− Provide appropriate return tanks and relieve pressure from the pumps via the return valves.
− Inform the security personnel / foreman / superiors.
8.2.2 GENERAL RULES FOR MAKING ADJUSTMENTS TO THE SPRAY GUN
Observe the operating manual of the spray gun.
WARNING
High-pressure spray jet!
Danger to life from injecting paint or solvent.
Never reach into the spray jet.
Never point the spray gun at people.
Consult a doctor immediately in the event of skin injuries caused by paint or solvent.
Inform the doctor about the paint or solvent used.
Never seal defective high-pressure parts, instead relieve the pressure from them and replace
them immediately.
Use personal protective equipment (protective clothing, gloves, eyewear and respiratory
protection).
