Operating the cooler
MyFridge MF-40
24
7.2
Using the cooling device
I
Note
Like every cooling device, your cooler must be properly ventilated
so that any heat created can be drawn off. Otherwise proper
functioning cannot be ensured.
➤
Switch the cooler on by turning the temperature control (fig.
3
1 page 4)
clockwise.
✓
The cooler starts cooling the interior.
You can set the temperature to any level using the control knob. The built-in
thermostat regulates the temperature as follows:
z
1 = least cooling
z
7 = most cooling
a
Warning
Only put items in the cooler which can be kept at the selected
temperature.
➤
If you stop using the cooler, turn the temperature controller (fig.
3
1,
page 4) to “0”.
I
Note
If you are not going to use the cooler for a long time, leave the door
slightly ajar to prevent unpleasant odours building up.
_mf-40.book Seite 24 Montag, 3. Dezember 2007 11:08 11
