![Waeco ASC G Wi-Fi kit Operating Manual Download Page 9](http://html1.mh-extra.com/html/waeco/asc-g-wi-fi-kit/asc-g-wi-fi-kit_operating-manual_867313009.webp)
EN
9
ASC G Wi-Fi kit
Operating
4. If your device is connected to the ASC:
Open a browser and enter the IP address shown on the ASC‘s dis-
play in the URL field of the browser:
✔
The user interface is shown in the browser.
5. If you connected for the first time to ASC set a bookmark to remem-
ber the IP address of the user interface.
6.1.2
Connecting to ASC in Client Mode
1. Ensure that the „airplane mode“ on your device is disabled.
2. Be sure Wi-Fi is enabled on your device.
3. Connect your device to the same network as the ASC.
4. If your device is connected to the ASC:
Open a browser and enter the IP address shown on the ASC‘s dis-
play in the URL field of the browser:
✔
The user interface is shown in the browser.
5. If you connected for the first time to ASC set a bookmark to remem-
ber the IP address of the user interface.
6.2
Overview of the user interface
You can access the functions by pressing the corresponding button of the
menu bar.
On a PC the menu bar is placed on the upper right corner.
On a tablet and on a cell phone the menu bar is placed at the bottom.
Icon
Command
Function
Sensors
Shows the ASC‘s current operating values.
Send task
Creates a task and sends it to the ASC (chapter
“Creating a task and processing it in the ASC” on
page 10).
Task history
Shows all finished tasks.
Maintenance
counters
Shows the ASC‘s current meter readings and the
total meter readings since the unit was produced.
Unit info
Shows the data of the ASC.
Access to Wi-Fi setup.
WaecoWiFiKit_OPM_4445103184_EMEA36_202x-xx-xx.book Seite 9 Mittwoch, 3. Februar 2021 11:33 11