Waeco ASC 6300 G LE, Operating Manual

Page: 38 / 254

EN
Problem Possible cause Suggested remedy
The display shows
Error 52
No USB flash drive was found/recog-
nised.
Insert the USB flash drive.
Ensure that the USB flash flash
drive has been formatted with the
FAT32 file system.
The display shows
Error 60 During the hybrid service (flushing the
service hoses with hybrid oil), a vacu-
um could not be achieved.
Are the service hoses connected to
the hybrid flush container?
Is the hybrid flush container fitted
the right way round?
Check the connections for leaks.
The display shows
Error 61 Pressure increase during the hybrid
service (flushing the service hoses with
hybrid oil).
Are the service hoses connected to
the hybrid flush container?
Is the hybrid flush container fitted
the right way round?
Are the service couplings open?
The display shows
Error G1
A connection to the analysis module
could not be made.
Check the connections.
Are the LEDs on the module acti-
vated?
The display shows
Error 00001
The readings are unstable. Keep possible electrical sources
of interference, such as mobile
phones or welding equipment, away
from the device.
The display shows
Error 00002 The readings are excessively high.
Keep possible electrical sources
of interference, such as mobile
phones or welding equipment, away
from the device.
The display shows
Error 00003 Calibration with the ambient air failed.
Ensure the device is adequately
ventilated.
Leave any leaking refrigerant to
drain off.
The display shows
Error 00004 The device is operating outside the rec-
ommended temperature range.
Only use the device in tempera-
ture-controlled rooms (10 °C – 45
°C).
Ensure sufficient ventilation.
The display shows
Error 00001
The refrigerant sample has a very high
content of air or the amount of refriger-
ant was too low for testing.
Ensure that there is enough refrig-
erant pressure.
Ensure that all the hoses are con-
nected, not kinked and free of oil.
16 Disposal
NOTICE! Protect the environment
All operating fluids and components may only be disposed of by qualified personnel in accordance with
national regulations.
Disposing of used fluids
• Used oil is hazardous waste.
• Do not mix used oil with other fluids.
• Prior to disposal keep used oil in suitable containers.
Disposing of packaging material
• Dispose of the cardboard packaging material with other waste paper.
• Dispose of plastic packaging material with other recyclable waste.
Disposal of the old A/C service unit
• If you wish to dispose of the A/C service unit, first completely drain it of all liquids and dispose of them accord-
ing to national regulations.
38