EN
Initial start-up
BMW5500G RPA
100
7.13
Verifying the analysis unit
This step uses fresh R-1234yf to test whether the analysis unit of the
AirConServiceCenter is working properly.
1. Connect the AirConServiceCenter to a new refrigerant vessel with
R-1234yf for verifying and then carry out the analysis, see figure:
2. If the analysis fails here three times, contact the hotline (see chapter
yes
no
no
no
yes
yes
AirConServiceCenter
OK
AirConServiceCenter
OK
AirConServiceCenter
OK
1. Perform the refrigerant analysis
Connect the AirCon Service Center for
verifying to a
new refrigerant tank with R-1234yf
Result:
Refrigerant
OK?
Result:
Refrigerant
OK?
Result:
Refrigerant
OK?
1. Repeat the refrigerant analysis
2. Repeat the refrigerant analysis
Fault in AirCon Service Center
Call the hotline
Dispose of the contaminated
refrigerant from the vehicle
Dispose of the contaminated
refrigerant from the vehicle
Dispose of the contaminated
refrigerant from the vehicle
WaecoBMW5500GRPA_OPM_4445102321_EMEA(de-en-es-fr-ru)_202x-xx-xx.book Seite 100 Freitag, 6. November 2020 9:04 21