
45
45
TESTING TOUCH
If you encounter problems with touch, it is a good idea to first check the assigned touch functions or reset
them to their default conditions.
To further test touch:
1. Attempt to move the screen cursor by tracking your finger across the tablet surface. Then tap to select
an item. A status LED should brighten when you touch the active area of the tablet. See also
2. Open the Wacom Tablet control panel and click on the A
BOUT
button. In the dialog box that appears,
click D
IAGNOSE
.... The D
IAGNOSTICS
dialog box shows dynamic information about the tablet, your
Intuos5 tool(s), and appropriate information for touch-sensitive tablets. See also
3. With the D
IAGNOSTICS
dialog box open, touch the tablet surface with first one, then with two fingers.
Each time you touch the tablet surface, a tablet status LED should brighten and the T
OUCH
I
NFO
state
should change.
4. When you are done, click the C
LOSE
button to exit the dialog box.