58
58
TESTING THE TOUCH RING
1.
With the D
IAGNOSTICS
dialog box open, observe the T
ABLET
I
NFO
column as you test the tablet Touch
Ring. If you have more than one tablet connected to your system, be sure you have selected the tablet
you are testing from the T
ABLET
I
NFO
column.
2. Slide your finger around the entire circumference of the Touch Ring. As you touch and move your finger
along the Touch Ring, a number will indicate the current finger T
OUCH
R
ING
position.
3. Press the Touch Ring toggle button to toggle between the four customizable states. As you cycle
between settings, a corresponding LED should illuminate.
Note:
If any of the functions are set to S
KIP
, the corresponding LED will be skipped in the toggle
sequence.
4. When you are done, click on the C
LOSE
button to exit the dialog box.
Important:
Remember that some applications can override and control the Touch Ring functions.
Consider closing any open applications except the Wacom Tablet control panel when testing the
Touch Ring. For details, see using applications integrated for tablet control.
TESTING THE EXPRESSKEYS
1.
With the D
IAGNOSTICS
dialog box open, observe the T
ABLET
I
NFO
column as you test each ExpressKey.
If more than one tablet is connected to your system, be sure you have selected the tablet you are testing
from the T
ABLET
I
NFO
column.
2. Test the keys on your tablet by clicking them one at a time. Each time you press a key, its number will be
displayed next to the L
EFT
K
EYS
category.
3. On the tablet itself, verify also that a tablet ExpressKeys icon is visible for each corresponding
ExpressKey.
4. When you are done, click on the C
LOSE
button to exit the dialog box.
Important:
Remember that some applications can override and control the ExpressKey functions.
Consider closing any open applications except the Wacom Tablet control panel when testing the
ExpressKeys. For details, see using applications integrated for tablet control.
