72
72
Working with AutoCAD
AutoCAD can support the Intuos3 tablet as a Windows system pointing device or as a Wintab compatible
digitizer. By default, AutoCAD is configured to use Intuos3 as a system pointing device. If you will be using
Intuos3 with tablet menus or to digitize drawings to proper scale, you will need to follow the procedures
below.
Note:
To configure the lens cursor or mouse for left handed use in AutoCAD or similar applications, open the
Wacom Tablet control panel, click on O
PTIONS
... and select L
EFT
in the H
ANDEDNESS
group.
Configuring AutoCAD for a Wintab compatible digitizer
1. Start AutoCAD. Open the T
OOLS
menu and select O
PTIONS
.
2. From the O
PTIONS
window, select the S
YSTEM
tab.
3. Under C
URRENT
P
OINTING
D
EVICE
, select the Wintab compatible digitizer option.
4. Decide from which device AutoCAD will accept input. Choose an option from the A
CCEPT
I
NPUT
F
ROM
section:
•
D
IGITIZER
O
NLY
.
The AutoCAD drawing editor only accepts input from Intuos3.
•
D
IGITIZER
AND
M
OUSE
.
The AutoCAD drawing editor accepts input from both Intuos3 and your
mouse.
5. Click OK to close the O
PTIONS
window.
