71
71
Customizing the lens cursor
To modify your Intuos3 lens cursor button settings, use your lens cursor to open the Wacom Tablet control
panel and select the M
OUSE
tab. As with the Intuos3 pen, you can select a function to perform for each
button from the pull-down menus. See
for a description of the available options.
The lens cursor buttons are chordable; you can press two or more buttons simultaneously. For example, if
you program one button to simulate the C
TRL
key and another to simulate an A
LT
keystroke, when you press
both buttons a C
TRL
+A
LT
is simulated.
Note:
To configure the Intuos3 lens cursor for left handed use, simply reassign the button functions as
needed.
Testing the lens cursor
1. With the D
IAGNOSTICS
dialog box open, place the Intuos3 lens cursor on the tablet’s active area and test
the buttons by clicking each button. The tablet status LED should change color, and the S
WITCHES
state
should change for each button you click.
2. When you are done, click on the C
LOSE
button to exit the dialog box.
1
2
3
5
4
Intuos3 lens cursor
