28
28
Adjusting tip feel and double-click
To adjust the tip sensitivity of your Intuos3 pen, select the P
EN
tab. To create broad brush strokes or to click
with a light touch, use a soft tip setting. For maximum control while drawing thin lines, use a firm tip setting.
Customizes the amount of pressure
needed to click or draw. Drag the
slider to a softer or firmer setting.
Press down on the tablet with your
pen tip to test the current tip feel
setting. You can use the C
URRENT
P
RESSURE
bar to determine how
hard you must press on the pen to
reach maximum pressure.
Displays the tip
box where you can further
customize the tip sensitivity.
Hints:
•
Use a soft T
IP
F
EEL
for a wider range of pressure values with most pressure-sensitive
applications.
•
In some applications a soft pressure setting can make the pen overreact – any small
press on the pen is magnified on the screen. If you experience this, try a firmer T
IP
F
EEL
setting.
•
Double-clicking: To make double-clicking easier, expand the tap area that accepts a
double-click (the double-click distance).
Note:
A large double-click distance may cause a delay at the beginning of your
brushstrokes in some drawing applications. If you notice such effects, try setting a
smaller double-click distance and using the side switch to double-click (see
). You can also set one of the ExpressKeys to double-click.
Returns the tab settings
to their factory default
conditions.
Adjusts the size of the double-click area.
A larger setting makes double-clicking
easier.
Drag the slider to the O
FF
position if you
do not want
.
