Page 13
SERIAL TABLET INSTALLATION
To install your Intuos 12x12 or 12x18 tablet:
1.
Turn off your computer and connect the
Macintosh serial adaptor cable to the tablet cable.
See
2.
Connect the AC power cable.
See
3.
Connect the adaptor cable to your computer’s
serial communication port, either modem or printer.
See
4.
Connect the Wacom power adaptor into an AC outlet or power strip.
Then turn on the tablet’s power switch. The tablet LED will light.
Important: Turn on your computer and temporarily disable any virus protection
programs before installing the software.
5.
Insert the Wacom CD into your computer.
6.
Double-click on the I
NSTALL
icon. Choose your language option, click OK, and follow
the prompts.
You should now be able to place your Intuos Pen on the tablet to move the screen cursor.
If you had any trouble with this installation, go to
Each time you start your computer, the Wacom Tablet startup icon tells you if the tablet
driver has successfully loaded.
The driver is loading.
The driver has loaded successfully.
The driver did not load.
The driver loaded, but a Wacom
tablet cannot be found. The tablet
may be unplugged or turned off.
C
B
A
Power Switch
B
A
C
