42
42
42
42
Products using wireless signals may interfere with the equipment on commercial aircraft, and
regulations require that all wireless devices be turned off when traveling in an airplane. Turn off the
Intuos tablet wireless signal by turning off or removing the wireless module (the Status LED will be
off) and DO NOT power on the wireless module during takeoff, transit, or landing.
Do not use Intuos wirelessly in a facility control system or any other environment that requires
extremely high reliability, or where the use of a wireless device may cause interference. Wireless
operation may interfere with or cause other electronic devices to malfunction, or other wireless
devices may interfere with or cause the tablet to malfunction. Where use of wireless products is
prohibited, power off or remove the wireless module (ensuring the wireless signal has been turned
off) to prevent the possibility of it interfering with or causing other electronic devices to malfunction.
Wacom does not accept any liability for direct or consequential damages. For details, please refer
to your Warranty, located within the Important Product Information document.
Power off your tablet in locations where/when electronic devices are not allowed. Because the
tablet may cause other electronic devices to malfunction in some locations where/when the use of
electronic devices is not allowed, such as within an airplane, be sure to turn off the tablet by
unplugging the USB connector from your computer.
OPTIMIZING THE WIRELESS CONNECTION
If your screen cursor lags behind the pen movement on the tablet or frequently “jumps” about, or if you see
excessive straight line segments when drawing in graphics applications, your wireless connection may not
be able to transmit all of the data from the tablet with the necessary speed. This may be caused by
interference from other radio sources, obstructions in the radio wave path, excessive distance from the
computer, or a combination of the above.
To improve the wireless connection and optimize tablet performance:
•
Remove any metallic objects that may be in the line of sight between Intuos and the Wacom wireless
receiver attached to your computer.
•
Try connecting the wireless receiver to a USB extension cable, and place it on your desktop or
somewhere in sight of Intuos.
•
Move the tablet closer to your computer.
•
Switch off any other devices operating in the 2.4 GHz radio spectrum, such as mobile telephones, etc.,
or move their antennas further away from your computer.
