GLOSSARY
Page 108
GLOSSARY
Active area. The drawing area of the tablet where your Graphire2 tools are detected.
Application-specific settings. Graphire2 tool and tablet settings that have been customized for
individual applications. The control panel enables you to program a tool to behave uniquely in different
applications. Your application-specific settings are in effect whenever you use the application.
Aspect. The ratio between the vertical and horizontal dimension of the tablet or display. The A
SPECT
setting is located on the M
APPING
/S
PEED
tab, and defines how the tablet area is mapped to the display
area. This setting determines if the aspect of the tablet and display are the same. It also determines if a
1:1 scale will be maintained between the tablet and display.
Click force. The amount of force you must apply to your Graphire2 Pen tip for a click to occur.
Double-click assist. A control panel option that makes it easier to double-click. When selected, you can
customize the double-click speed and distance.
Double-click distance. The maximum distance (in screen pixels) that the cursor can move between
clicks and still be accepted as a double-click. Increasing the double-click distance makes double-clicking
easier, but may cause a delay in brush strokes in some graphics applications.
