Page 41
USING THE 4D MOUSE
The Intuos 4D Mouse is a cordless, batteryless mouse that works on any Intuos tablet. By default, you
can position the screen cursor like you do with a regular mouse (M
OUSE
M
ODE
). By choosing P
EN
M
ODE
in the Mapping tab, you can position and navigate the screen cursor like you do with the Intuos Pen. By
default, the thumbwheel is set for up and down scrolling functionality. The 4D Mouse also supports axial
rotation. In applications that support device rotation, simply turn the 4D Mouse on the tablet to control the
rotation parameter.
The front button nearest the thumbwheel
is set to click by default.
The front button opposite
the thumbwheel simulates
a C
TRL
+
CLICK
by default.
The middle button is set to perform
a double-click by default.
Move on to the next section to learn about
. To learn how to program
buttons, see
Customizing the 4D Mouse and Lens Cursor
The rear buttons are ignored by default.
Important: When the
4D Mouse is not in use,
place it on your desk.
Leaving an Intuos tool on
the tablet may interfere
with screen cursor
positioning when using
other pointing devices.