Wacom Cintiq 24HD User Manual Download Page 81

Page: 81 / 160

CHOOSING STANDARD MULTI-TOUCH FUNCTIONS

To customize Cintiq for your touch preferences, select the S

TANDARD

ESTURES

tab.

Note: This tab is not available for Windows systems. The Windows standard two-finger actions and

gestures are always available.

Multi-touch

actions and gestures are available

when selected.

So that you may work in different ways, some
functions (such as a right-click) can be
performed using different actions or gestures.

Position the screen cursor over a touch option
to see a static image of that function.

If you do not choose a specific option to view,
then the control panel will display each option
sequentially, from top to bottom.

Summary of Contents for Cintiq 24HD

































































































































































Search results

Summary of Contents for Cintiq 24HD

Reviews:

Related manuals for Cintiq 24HD

Brands by name

Popular brands

Wacom Cintiq 24HD, User Manual

Search results

Summary of Contents for Cintiq 24HD

Reviews:

Related manuals for Cintiq 24HD

Brands by name

Popular brands