22
22
DISPLAY STAND LOCATION
Select a location on your desktop or other work surface that is level and stable. This product weighs
approximately 29 kg (64 lbs). Any table or platform on which this product is installed must be able to
support the combined weight of the Cintiq interactive pen display and Cintiq display stand.
•
Before moving Cintiq, adjust the pen display
so the display stand support arms are
locked upright, with Cintiq positioned horizontally. Place all cables on top of the stand base and ensure
they do not hang free. Tripping over loose cables can cause physical damage or personal injury.
•
Request assistance from another person or persons. Each person should securely grasp the lower part
of a display support arm near the display stand base. With the other hand, grasp the base of the stand
at the front corner. Using care, lift and carefully move this product while supporting the base of the
stand.
Important: The assembly is heavy. Do not attempt to lift Cintiq by yourself. Each person should use
both hands to securely grasp the product. Grasp the stand base at the corner areas to avoid any
sharp edging. DO NOT lift the pen display itself, otherwise damage might occur to the LCD if it
flexes during movement. Also, the pen display does not have sufficient strength to support the load
of the stand hanging freely from it. Work together, and lift carefully.
•
Locate Cintiq on a desktop or other working surface that is flat, clean, and free of any moisture or oily
film. Taking care not to pinch your fingers, do this by first placing the rear half portion of the stand onto
the table surface. Then slide the stand fully into place so that it will not tip or fall.
•
When in place, use the incline levers to rotate the display back to a vertical position.
Do not lift by the incline levers or upper portion of the display support arms. Improper operation may lead
to physical injury or damage to the stand. Avoid catching your finger in the gaps of the movable portions
of the stand.
Place Cintiq securely on a level, stable desktop or other working surface. Do not allow any portion of the
display stand base to protrude from the installation surface. Otherwise, Cintiq may fall and cause physical
damage or personal injury.
Do not place this product on any unsteady surface or table. Do not place on slanted areas, unstable areas,
or areas where vibration is present. Physical damage or personal injury may result if this product falls from
an unsuitable surface.
Do not place this product on any wet surface or table. Doing so may cause the pads on the base of this
product to slip, allowing the product to fall.
Warning
