Wacom Cintiq 24HD User Manual Download Page 135

Page: 135 / 160

135

135

REPLACING THE PEN NIB

To protect your pen display from scratching and for best performance, periodically replace your pen nibs.

Important: Replace the pen nib before or when it looks like this:

1. Unscrew the pen stand base to access the nib removal tool and replacement nibs.

2. Clasp the old nib and pull it straight out of the pen. Use the nib removal tool, pair of tweezers,

needle-nosed pliers, or similar instrument.

The pen nib (tip) will wear with normal use.

Excessive pressure will cause it to wear
sooner.

Replace the nib when it gets too short or
develops a flat point.

Nib removal tool

Replacement nibs

Cintiq 24HD touch
10 standard nibs

Cintiq 24HD
6 standard nibs
3 hard felt nibs
1 stroke nib

Summary of Contents for Cintiq 24HD

































































































































































Search results

Summary of Contents for Cintiq 24HD

Reviews:

Related manuals for Cintiq 24HD

Brands by name

Popular brands

Wacom Cintiq 24HD, User Manual

Search results

Summary of Contents for Cintiq 24HD

Reviews:

Related manuals for Cintiq 24HD

Brands by name

Popular brands