manualshive.com logo in svg

Wacker Neuson WP 1550A, Operator'S Manual

Share
Download
Wacker Neuson WP 1550A Operator'S Manual Download Page 31

WP 1550A/AW

Maintenance

wc_tx000055gb.fm

29

5.12 Lifting Machine

See Graphic: wc_gr000079

See Technical Data for the weight of the machine. 

To lift machine manually:

5.12.1

Stop the engine.

5.12.2

Obtain help from a partner and plan the lift.

5.12.3

Grasp the machine by its cage (a) and lifting handle (b).

5.12.4

Lift the machine as shown. 

To reduce risk of back injury while lifting, keep your feet flat on ground
and shoulder width apart. Keep your head up and back straight.

To lift machine mechanically:

CAUTION: Before attempting to lift, be sure that all lifting devices can
safely handle the weight of the machine. See Technical Data for the
weight of the machine.

5.12.5

Attach hook, harness, or cable to the machine as shown and lift as
desired.

CAUTION: DO NOT lift the vibroplate by its guide handle. The
vibroplate can shift, causing it to fall.

WARNING

w c g r 0 0 0 0 7 9

=

>

Summary of Contents for WP 1550A




































Reviews:

No comments

Brands by name

Popular brands

Load more brands