Wacker Neuson RC50, Instruction Manual

Page: 27 / 222

Preface
Noise and vibration requirements
BA RC50_RC70 en 00 27
1.06 Noise and vibration requirements
The sound emission of the machine was measured according to the CE
Sound Emission Directive in the version 2000/14/EC.
The sound and vibration indications on the driver's seat correspond to the
requirements of the CE Machinery Directive in the version 2006/42/EC.
Sound power level
Sound indication of the machine
The guaranteed sound power level is specified in the machine's technical
data (see "Technical data" sqq.).
Sound pressure level
Sound indication on operator panel
The sound intensity level on the driver's seat is specified in the machine's
technical data (see "Technical data" sqq.) (measurement inaccuracy
according to DIN EN ISO 11201).
N O T E
When working in the immediate vicinity of the machine, values
may exceed 85 dB(A). In this case, please always wear
personal protective equipment (ear protection).
Vibration indication on the operator panel
Whole body vibration
The weighted rms values of the acceleration with whole body vibrations
on the operator's seat have been accessed in accordance with DIN EN
1032 and do not exceed a
w
= 0.5 m/s².
Hand arm vibrations
The weighted rms values of the acceleration with hand arm vibrations
have been accessed in accordance with DIN EN 1032 and do not exceed
a
hw
= 2.5 m/s².